SPRAY WASHING SYSTEM WITH ROTATING WASHING BASKET
CeBeCo® TROWAMAT® XL
The CeBeCo® TROWAMAT® XL is a spray cleaning system with a moving washing basket. The spray cleaning process is used for cleaning bulk goods, such as large-volume, thick-walled, bent pipes.
This machine was specially developed as a stand-alone solution for cleaning series components, e.g. in the machining and forming industry.
Thanks to its stable, robust and compact design, as well as all components in contact with the media being made of stainless steel, it offers a cost-effective, long-lasting solution for series cleaning.
SPEACIAL FEATURES
DETAILS
DESIGN
The CeBeCo® TROWAMAT® XL is manufactured from strong stainless steel sheet in a welded construction and is available in three standard sizes. Intermediate or special sizes according to customer-specific requirements are possible
FEATURES
Electric, direct heating, submersible pump, direct-drive rotary wheel, stainless steel nozzle system arranged on all sides, drying device, vapour extraction, pneumatic door, coarse filter basket
ADDITIONAL FEATURES
Rinsing device, ultra-fine filter in the main flow, oil separator for non-emulsified oils in the bypass flow, circulating ultra-fine filter device in the bypass flow, circulating air drying, ultra-fine air filtration, drain pump, interval blow-off system, floor protection tray, weekly timer, increased operating weight, 6-nozzle system, feed station (in various versions), air conditioning unit
EXPANDABLE PUMP SYSTEM
The system is supplied with a retrofit option for an additional submersible pump in the wash tank. If the cleaning requirements change over time, a second submersible pump can be installed without much effort. Both submersible pumps can also be retrofitted with ultra-fine filters in the main flow.
BASKET RECEIVING FRAME
The basket receiving frame has the external dimensions of a Euronorm mesh box and space for up to eight smaller baskets (600 x 400 x 280 mm each). This means that even small bulk goods can be cleaned in one wash cycle.
TECHNICAL DATA
Cleaning system: | Spray cleaning with flat jet nozzles |
Operating principle: | Moving load pick-up with nozzle system arranged on all sides |
Loading: | Front loading and unloading at the same point |
Material system: | Stainless steel 1.4301 |
Cladding material: | Galvanised sheet steel (painted) |
Tank insulation: | 25 mm insulation |
Control system: | Siemens Simatic with Siemens touch panel |
MODEL VARIATIONS
The TROWAMAT® XL is available in different model variants and can of course also be customised according to your specifications - just contact us.
This model consists of a wash tank (W), a rinse tank (S) and a drying unit with hot air blower (T). The "rinsing" storage tank is equipped with an ultra-fine filter in the main flow and a pumping device as a water-saving measure. Due to the usable dimensions corresponding to the size of a Euronorm mesh box, further reloading of the components can be avoided, thus saving a handling step.
With this model, a cleaning cycle also consists of the steps washing (W), rinsing (S) and drying using a hot air blower (T). A special feature of this model variant is a pre-installed fully automatic loading station. The wash basket is placed on one of the loading and unloading stations and transported into the wash chamber and cleaned fully automatically at the touch of a button using a sliding unit and a pusher. Once the cleaning cycle is complete, the wash basket automatically returns to its starting position.
This CeBeCo® TROWAMAT® XL also comprises three possible process steps - washing (W), rinsing (S) and drying in the convection process (T). To fully cover the enlarged usable space, the nozzle system, which is arranged on all sides, has been extended to the door and the rear wall. In addition, twice the number of pumps were used for the washing process and a pump with increased throughput for the rinsing process. The combination of submersible pumps and high-pressure centrifugal pumps makes it possible to apply a large volume of water (approx. 1,400 l/min at approx. 4 bar) and increased pressure (approx. 600 l/min at approx. 20 bar) to the items to be washed.
Interested?
We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.
We are here for you
Contact
Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you. | You can reach us at: +49 (0)22 03/9 35 21-0 |
Get in contact!
How can we help you?
Of course, you can also send us your message or question simply and conveniently using this form and we will get back to you as soon as possible.