SPRAY / FLOOD CLEANING SYSTEM
CeBeCo® TROWAMAT® combi
The CeBeCo® TROWAMAT® combi is a spray/flood cleaning system with a moving washing basket. The spray/flood cleaning process is used for cleaning bulk goods such as stamped and turned parts or components with complex geometries such as bent pipes.
geometries such as bent tubes.
This machine was specially developed as a stand-alone solution for cleaning series components, e.g. in the machining and forming industry. Thanks to its stable, robust and compact design, as well as all components in contact with the media being made of stainless steel, it offers a durable, versatile solution for series cleaning.
SPECIAL FEATURES
DETAILS
DESIGN
The CeBeCo® TROWAMAT® combi is manufactured from strong stainless steel sheet in a welded construction. In its standard version, this system is manufactured according to the two-tank principle, whereby additional tanks can be added on request. Intermediate or special sizes according to customer-specific requirements are also possible.
FEATURES
Rinsing device, electric, direct heating, submersible pump, direct-drive rotary wheel, stainless steel nozzle system, hot-air drying device, vapour extraction, coarse filter basket, pneumatic door system
ADDITIONAL FEATURES
Ultrasonic equipment, oil separator for non-emulsified oils in the off-line process, ultra-fine filter in the main flow, ultra-fine circulation filter device in the off-line flow, ultra-fine air filtration, circulating air drying, floor protection tray, feed station (in various designs), emptying pump, weekly timer, air conditioning unit, external vacuum drying
FLOODING DEVICE
Various pneumatic devices make it possible to flood the working chamber with cleaning medium in just a few seconds. During this process, the wheel continues to move continuously. Once the pre-selected time has elapsed, the chamber is emptied abruptly by opening the corresponding valve. The resulting suction effect allows even complex pipe geometries to be cleaned of even the smallest amounts of dirt.
ULTRASONIC
Pushpull transducers are optionally installed in the washing chamber. As soon as the chamber is flooded, the ultrasound acts on the rotating items for a preset time
on the rotating wash items for a preset period of time, thus supporting the cleaning effect on the outer surfaces.
TECHNICAL DATA
Cleaning system: | Spray and flood cleaning |
Functional principle: | Moving load pick-up with nozzle system arranged from above |
Loading: | Front loading at the same point |
System material: | Stainless steel 1.4301 or 1.4571 |
Cladding material: | galvanised sheet steel (painted) or stainless steel |
Tank insulation: | 25 mm insulation |
Control system: | Siemens Simatic with Siemens touch panel |
MODEL VARIATIONS
The TROWAMAT® combi is available in different model variants.
Customised adaptations according to your specifications are of course also possible - just contact us.
This model consists of a washing tank (W), two rinsing tanks (S) and a hot air drying unit (T). The cleaning effect is supported by ultrasound supported by ultrasound. A loading table with a plastic sliding plate is pre-assembled for loading the working chamber. Thanks to its wide design, this also serves as a buffer section for production and minimises downtimes during loading and unloading.
In this model variant, a washing tank (W) and a rinsing tank (S) are installed, each equipped with an ultra-fine filter in the main flow process. The system also has a drying unit with a hot air blower (T). The loading station of this system has been replaced by a pallet truck so that the wash items can be positioned in the wash baskets directly at the workplace and then transported to the system and into the wash chamber.
This model consists of a wash tank (W) and a rinse tank (S), each equipped with an ultra-fine filter in the main flow process. Furthermore the system has a drying unit with hot air blower (T). An ultrasonic unit is installed to support the cleaning effect. The washing baskets can be raised and lowered automatically by means of the scissor lift table fitted in front to improve ergonomics. With this system, either one large standard basket (1,250 x 400 x 280 mm) or two smaller standard baskets (600 x 400 x 280 mm) can be used.
Interested?
We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.
We are here for you
Contact
Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you. | You can reach us at: +49 (0)22 03/9 35 21-0 |
Get in contact!
How can we help you?
Of course, you can also send us your message or question simply and conveniently using this form and we will get back to you as soon as possible.