CLEANING SYSTEM IN CONTINUOUS CYCLE PROCESS
CeBeCo® ROWAMAT® XP
The CeBeCo® ROWAMAT® is a cleaning system with intermittent transport of the items to be washed. The cleaning process is used for cleaning bar stock, such as straight tubes, square tubes or gas spring housings.
This machine can be used both as an inline and stand-alone solution for the initial cleaning or preservation of profiles, e.g. in sawing centres or at distributors.
Thanks to its stable, robust and compact design, as well as all components that come into contact with the media being made of stainless steel, it offers a cost-effective, uncomplicated solution for series cleaning.
SPECIAL FEATURES
DETAILS
DESIGN
The CeBeCo® ROWAMAT® is manufactured from strong stainless steel sheet in a welded construction and is available in seven standard sizes. Intermediate or special sizes according to customer-specific requirements are possible.
FEATURES
Electric, direct heating, high-pressure immersion pump, wash material transport drum with direct drive, control panel, pump power control, drying device, automatic transport system in the drying zone, vapour extraction, coarse filter basket, oil separator for non-emulsifying oils in the bypass flow, weekly clock.
ADDITIONAL FEATURES
Ultra-fine filter in the main flow, circulation fine filter device in the secondary flow, air fine filtration, floor protection tray, feed station (in various designs), drain pump, air conditioning unit, conveyor systems.
LOAD TRANSPORT DRUM
The wash ware is cycled through the system along a fixed stop side with the aid of a drum. During this process, it is continuously circulated and flushed with washing medium.
Each drum segment can be loaded with either one large or several small tubes according to the respective outer diameter.
PRISM TACTICER
The prism timer is the transport system of the drying zone. The items to be washed are guided along a fixed stop side past a circulating air drying system. Thanks to the use of highly heat-resistant plastic, the items to be washed are moved gently and conveyed out of the system without being damaged.
TECHNICAL DATA
Cleaning system: | Continuous cleaning system |
Functional principle: | Heavily rinsed, partially flooded drum segments of a moving washing material transport drum |
Loading: | Manually or via an upstream system |
System material: | Stainless steel 1.4301 |
Cladding material: | galvanised sheet steel (painted) |
Tank insulation: | 25 mm insulation |
Control system: | Siemens Simatic with Siemens touch panel |
MODEL VARIATIONS
The ROWAMAT® is available in different model variants.
In addition, customised adaptations according to your specifications are of course no problem - just contact us.
This model has a specially designed drum for aluminium and square tubes. The modified design of the product transport drum and the additionally installed ejector make it possible to clean even particularly light or structurally complicated bar stock. The system is designed for inline use.
This model is designed as a stand-alone solution. A loading station has been pre-assembled for manual loading, on which items to be washed can be placed in the front area and the automatic system can be started at the touch of a button. The danger zone is protected by a safety light curtain for personal safety. The washing time can be freely selected on the touch pan.
This model has an enlarged and reinforced washing material transport drum. Pipes up to a maximum outer diameter of 150 mm and a wall thickness of 10 mm can be washed at a maximum length of 2,000 mm. A chain conveyor is pre-assembled to bridge a height difference and a distance to the existing high-speed saw. Furthermore, a stainless steel heating coil is installed in the storage container, which is fed by external heat. It supports the electrical heating and thus reduces the energy consumption of the system.
Interested?
We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.
We are here for you
Contact
Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you. | You can reach us at: +49 (0)22 03/9 35 21-0 |
Get in contact!
How can we help you?
Of course, you can also send us your message or question simply and conveniently using this form and we will get back to you as soon as possible.