Contact

 

+49 (0)22 03/9 35 21-0

SPECIAL FEATURES

Minimising downtimes:
The built-in shifting station allows up to two tons to be moved with ease and reduces the time between washes to a minimum.
Cleaning of hard encrustations:
By using the high-pressure centrifugal pump with separate nozzle system.
Height adjustment of the nozzle holders:
Ideal utilisation of the spray pattern of the nozzles thanks to the electrically adjustable upper nozzle block.

DETAILS

DESIGN

The CeBeCo® ROTIMAT is manufactured from strong stainless steel sheet in a welded construction and is available in four standard sizes. Intermediate or special sizes according to customer-specific requirements are possible. Aqueous cleaners are used.

FEATURES

Electric, direct heating, high-pressure immersion pump, stainless steel nozzle system, vapour extraction, coarse filter basket, door flap, rotating wash basket

SPECIAL FEATURES 

Rinsing device, high-pressure centrifugal pump (pump system extension), oil separator for non-emulsified oils in the bypass process, ultra-fine filter in the main flow, ultra-fine circulation filter device in the bypass flow, ultra-fine air filtration, drying device, pneumatic door, floor protection tray, increased operating weight, feed station (in various designs), drain pump, weekly timer, adaptations

SHIFTING STATION

The shifting station enables process times to be optimised and downtimes to be minimised. With its particularly stable design, it is possible to move up to two tons (one per carriage) by hand with ease. Each wash item support mounted on a carriage can be rotated 360° after releasing a locking mechanism to simplify even loading.

HIGH-PRESSURE CENTRIFUGAL PUMP

The high-pressure centrifugal pump (manufactured by Grundfos) generates a pressure of up to 20 bar. Thanks to a separate nozzle system, it can be used either alone or in parallel with the submersible pump for cleaning. This means that even stubborn incrustations and grease can be cleaned off.

TECCHNICAL DATA

Cleaning system:Spray cleaning with flat jet nozzles
Functional principle:Rotating turntable with three-sided nozzle system
Loading:Front and top loading and unloading
System housing:Stainless steel
Tank insulation:25 mm insulation
Control system:Siemens control system with optional touch panel

 

MODEL VARIATIONS

The ROTIMAT is available in different model variants.
Customised adaptations according to your specifications are of course also possible - just contact us.

 

ROTIMAT type T size 3 WT

This model variant is loaded from above after opening the lid. It is equipped with a single tank system (W) and has a drying unit with hot air blower (T) as well. Its compact design makes it ideal as a workplace machine for individual parts.

ROTIMAT type F Smart size 180 D/100 W

This model variant is a single-tank system (W) with an additionally mounted high-pressure centrifugal pump. It has a swiveling nozzle holder that can be optimally adjusted to the height of smaller items to be washed. As a loading station, this variant is supplied with a trolley (incl. drip tray mounted underneath). It enables the items to be washed to be removed and positioned directly at the workstation and then transported to and from the externally installed system.

ROTIMAT type F size 5 WST

This model is equipped with a washing tank (W), a rinsing tank (S) and a drying unit with hot air blower (T). In addition, a feed and removal roller conveyor is attached, which is which can be ideally used as a buffer section for production. The control panel is equipped with a height-adjustable swivel arm for optimum operation of the system

ROTIMAT type F size 140 D/70 WS

This model consists of a wash tank (W) and a rinse tank (S). To increase the cleaning performance, a high-pressure centrifugal pump with its own nozzle system is installed, which can be selected in the panel in addition to the submersible pump already installed. The shifting station enables downtimes between the individual wash cycles to be reduced to a minimum.

Interested?

We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.

 

We are here for you

Contact


Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you.  

You can reach us at:

+49 (0)22 03/9 35 21-0
info[at]bous.tech

Get in contact now!

datenschutz

Note: You can revoke your consent at any time by sending us an e-mail to info[at]bous.tech. Detailed information on the handling of user data can be found in the privacy policy.

 

Contact

+49 (0)22 03/9 35 21-0

Office hours:
Monday to Thursday:
07:00-16:00 h
Friday: 07.00 – 13.15 h

Deutsch · English
Deutsch
English