Contact

 

+49 (0)22 03/9 35 21-0

Home · Our products · Machines overview · REVOLVOMAT

Specials

For integration into production islands:
Manual and robot loading possible
Wide range of wash items:
Interchangeable adaptation plates allow the machine to be customised to its range of parts.
Optimisation of energy consumption:
By integrating an air circulation process in the blow-off zone.

DETAILS

DESIGN

The CeBeCo® REVOLVOMAT is manufactured from strong stainless steel sheet in welded construction in numerous standard designs and can be customised to meet specific customer requirements.

FEATURES

Washing and rinsing device, electric, direct heating, submersible pump, level monitoring, stainless steel nozzle system, blow-off device, vapour extraction, coarse filter inserts, segment drum with direct drive

ADDITIONAL FEATURES

Additional nozzle system, oil separator for non-emulsified oils in the off-line process, ultra-fine filter in the main flow, ultra-fine circulation filter device in the off-line flow, pneumatic door, ultra-fine air filtration, compressed air blow-off, floor protection tray, drain pump, weekly timer, air conditioning unit, adaptations

RECIRCULATING AIR BLOW-OFF DEVICE

To minimise energy consumption, a recirculation blow-off zone is integrated. The heated chamber air is sucked in, fresh dry hot air is added and then blown over the wash item. The residual moisture on the component is minimised.

HEIGHT ADJUSTMENT

To enable quick adjustment to different wash ware heights, the adaptation is equipped with a quick-release system. The height of the unit can be easily adjusted by releasing a locking bolt and using a practical handle.

Technical data

Cleaning system:Spray cleaning with flat jet nozzles
Functional principle:Rotating segment drum for transporting the wash ware to the individual zones
Loading:Front loading and unloading at the same point
System material:Stainless steel 1.4301
Cladding material:galvanised sheet steel (painted) or stainless steel
Tank insulation:25 mm insulation
Control system:Siemens Simatic with Siemens touch panel

 

Selection of model

The REVOLVOMAT is available in different model variations.
customised adaptations according to your specifications are of course also possible - just contact us.

 

REVOLVOMAT T6/70 WSA

This model consists of a washing tank (W), a rinsing tank (S), each equipped with an ultra-fine filter in the main flow and a blow-off zone using the air circulation method (A). This system can be switched from robot to manual loading using a selector switch. The maximum usable height of the system is 700 mm.

REVOLVOMAT T6/120 WSA

This model consists of a wash tank (W), a rinse tank (S), each equipped with an ultra-fine filter in the main flow and a blow-off zone using the air circulation method (A). It is designed for robotic loading only and is also equipped with a compressed air blow-off device to remove residual moisture. The maximum usable height is 1,200 mm.

REVOLVOMAT T6/175 WSA

This model consists of a wash tank (W), a rinse tank (S), each equipped with an ultra-fine filter in the main flow and a blow-off zone using the recirculation method (A). The system is equipped with a storage tank that has its own heating system. This storage tank feeds both the wash and rinse tanks with preheated demineralised water by means of a circulation pump in order to to compensate for evaporation losses with preheated medium and thus minimise downtimes caused by the heating phase. The system is designed for manual loading and is secured at the loading and unloading position by means of a light barrier. In addition, the operating status of the system is indicated by an indicator light inside the chamber. The maximum usable height of the system is 1,750 mm.

Interested?

We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.

 

We are here for you

Contact


Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you.  

You can reach us at:

+49 (0)22 03/9 35 21-0
info[at]bous.tech

Get in contact now!

datenschutz

Note: You can revoke your consent at any time by sending us an e-mail to info[at]bous.tech. Detailed information on the handling of user data can be found in the privacy policy.

 

Contact

+49 (0)22 03/9 35 21-0

Office hours:
Monday to Thursday:
07:00-16:00 h
Friday: 07.00 – 13.15 h

Deutsch · English
Deutsch
English