Contact

 

+49 (0)22 03/9 35 21-0

SPECIAL FEATURES

Fulfils particularly high purity requirements:
First filtration using a surface filter and additional filtration using an even finer depth filter.
Pulsating valve switching:
through rapid opening and closing of the valves
Wide range of wash items:
Thanks to a quick-change system for the adaptation plates, these can be customised to suit your range of parts
Double working chamber:
Enables fast, user-friendly loading of the adaptations with their wash items during a cleaning process in another chamber

DETAILS

FUNCTION/ AREA OF APPLICATION

The targeted and flexible flow system achieves optimum internal cleaning. The extensive filter systems in the main flow ensure the greatest possible freedom from particles in the process. The ergonomically designed working chamber enables the adaptations to be loaded quickly and easily with the items to be washed. The quick-change system of the adaptation plates allows them to be customised to your range of parts.

DESIGN

The CeBeCo® PULSOMAT is manufactured from strong stainless steel sheet in welded construction and adapted to customer-specific requirements.

FEATURES

Washing, rinsing and blow-off system (heated compressed air), electric, direct heating, stainless steel immersion pump, ultra-fine filtration of both media, ultra-fine air filtration, pump-over device, vapour extraction, coarse filter basket, weekly timer

ADDITIONAL FEATURES

Oil separator for non-emulsifying oils in the bypass flow, ultra-fine filter in the bypass flow

FILTRATION

Both media are conveyed through a surface filter with a high degree of fineness before flowing through the wash material. In addition, after the first filtration, the rinsing medium is divided into six depth filters with even finer filtration (one per adaptation point). This enables us to fulfil very high purity requirements.

PULSATING VALVE CIRCUIT

By quickly opening and closing the built-in shut-off valves, we create a vacuum within the complex geometries of the wash ware and achieve virtually particle-free cleaning (depending on the soiling and the cleaning agent used).

Technical data

Cleaning system:Ultra-fine internal cleaning system
Functional principle:Cleaning by pulsating valve switching and extensive filtration
Loading:Front loading and unloading at the same point
System material:Stainless steel 1.4301
Cladding material:galvanised sheet steel (painted)
Tank insulation:25 mm insulation
Control system:Siemens Simatic with Siemens touch panel

 

Model variations

The PULSOMAT is available in different model variants.
Customised adaptations according to your specifications are of course also possible - just contact us.

 

Version PULSOMAT EK-S

This model is a single-chamber system with a pneumatic door. In addition to the standardised horizontal adaptation points along the top edge of the washing chamber, vertical adaptation points can also be controlled. This means that longer components can also be cleaned diagonally in the working chamber (maximum length approx. 2,500 mm).

PULSOMAT DK-S

This model is also based on the double-chamber principle, but the special feature here is the positioning of the chambers. This system has been specially designed for robot loading. Due to its design, it is possible to install a robot in the centre between the chambers and keep the travel distances as short as possible.

PULSOMAT DK

This model is a double-chamber version. The sliding glass door shown can be moved sideways. This allows the second working chamber to be reloaded during a cleaning process in one chamber. This allows an increased throughput and optimum utilisation of the system. 

Interested?

We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.
Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.

 

We are here for you

Contact


Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you.  

You can reach us at:

+49 (0)22 03/9 35 21-0
info[at]bous.tech

Get in contact now!

datenschutz

Note: You can revoke your consent at any time by sending us an e-mail to info[at]bous.tech. Detailed information on the handling of user data can be found in the privacy policy.

 

Contact

+49 (0)22 03/9 35 21-0

Office hours:
Monday to Thursday:
07:00-16:00 h
Friday: 07.00 – 13.15 h

Deutsch · English
Deutsch
English