Contact

 

+49 (0)22 03/9 35 21-0

Special features

Loading:
The system is loaded and unloaded either manually or fully automatically by robots. Loading and unloading zone at different locations (continuous process)
Water management:
Extension of the service life of the medium through fully automated water management.
Customised cleaning processes:
Cleaning processes selectable for customer requirements (spray, immersion or ultrasonic zones)

DETAILS

CONSTRUCTION

The CeBeCo® DUWAMAT is manufactured from strong stainless steel sheet in a welded construction.

FEATURES

The CeBeCo® DUWAMAT is individually designed according to customer-specific requirements, e.g. number and selection of zones, cleaning process and wash item transport.

PROCESS OPTIONS

The items to be washed are:

  • rinsed (sprayed) through appropriate nozzle units
  • immersed in the cleaning medium in cycles
  • flooded chamber by chamber
  • exposed to ultrasound chamber by chamber
  • mechanically processed with rotating brushes

TRANSPORT OPTIONS

The goods to be washed can be transported in different ways, e.g. wire belt conveyors, overhead conveyors, chain conveyors, prismatic conveyors or roller conveyors.

CLEANING PROCESS

Whether, for example, pure spraying or mechanically assisted cleaning is customised to the wash item.

FIXTURES

The wash item holders are adapted to the different shapes of the wash items and the associated cleaning requirements.

Technical data

Cleaning system:Spray cleaning with flat jet nozzles
Functional principle:Moving load pick-up with nozzle system arranged on all sides
Loading:Front loading and unloading at various points
System material:Stainless steel 1.4301 or 1.4571
Cladding materia:galvanised sheet steel (painted) or stainless steel
Tank insulation:25 mm insulation
Control system:Siemens Simatic with Siemens touch panel

 

Models variations

The DUWAMAT is available in different model variants.
Customised adaptations according to your specifications are of course also possible - just contact us.

 

DUWAMAT K 350 WAST

This model consists of a washing zone (W), a rinsing zone (S), each with an ultra-fine filter in the main flow, an intermediate blow-out zone (A) and a drying unit with hot air blower (T).

The wash item holders of the chain transport system are specially adapted to the customer's wash items. To compensate for any carry-over of the cleaning media, the system is equipped with a fully automatic water management system.
 

DUWAMAT K 1000 WASAT

This model consists of a wash tank (W) and a rinse tank (S), each equipped with an ultra-fine filter in the main flow. Blow-out zones are installed between the respective chambers,
to minimise carry-over. The system also has a drying unit with a hot air blower (T).

In this model variant, only the processed pipe ends and the inside of the pipe are cleaned alternately or in opposite directions. The transport system can be adapted to the respective pipe length by means of manual length adjustment.
 

6K DUWAMAT

This model variant was specially developed for descaling pipes and is equipped with a fully automatic traversing system to simplify the process. The loaded wash items pass through the individual chambers and are immersed with an adjustable dwell time.

The following chambers are arranged in sequence with their respective functions:

Chamber 1 & 2 = washing zone with phosphoric acid (incl. ultrasonic support)
Chamber 3 = Neutralisation rinse
Chamber 4 = Rinsing chamber with deionised water
Chamber 5 = Preservation zone
Chamber 6 = Drying chamber with blow-off station

Interested?

We would be happy to invite you to our factory to carry out practical washing tests with your wash ware on site.Thanks to our large fleet of machines for sale, we have a large number of available machines that can be used for trials. We always have each of our cleaners in stock so that we can work out how we can clean your wash items most effectively with the best results during the washing trials.

We are here for you

Contact


Do you have any questions about our machines or our services? Talk to us. Our service and sales staff will be happy to help you.  

You can reach us at:

+49 (0)22 03/9 35 21-0
info[at]bous.tech

Get in contact now!

datenschutz

Note: You can revoke your consent at any time by sending us an e-mail to info[at]bous.tech. Detailed information on the handling of user data can be found in the privacy policy.

 

Contact

+49 (0)22 03/9 35 21-0

Office hours:
Monday to Thursday:
07:00-16:00 h
Friday: 07.00 – 13.15 h

Deutsch · English
Deutsch
English