CeBeCo® ROWAMAT® “DT”
Pipe washing system in continuous cycle process
- Available for interlinking with sawing centres and endworking systems as well as stand-alone system
- With throughputs of up to 1,200 pieces/hour, depending on interlinking and pipe dimension
- With minimum set-up effort
Construction
The CeBeCo ROWAMAT “DT” (double drum) is made of strong stainless steel sheet in welded construction. Versions or sizes according to customer-specific requirements possible. Aqueous cleaners are used.
Equipment
Electric direct heating, insulation, digital thermostat, high-pressure immersion pump, coarse filter insert, drying device, vapour extraction, double drum with direct drive.
Supplementary features
Oil separator for non-emulsified oils in the bypass process, fine particle filter in the main flow (surface filter), fine particle filter in the bypass flow (depth filter), bottom protection trough, feed stations (in various designs), drain pump, weekly clock.
Types
TYPE DESIGNATION |
RL 60 DT |
Pipe lengths (MM) |
up to 600 |
tube diameter (MM) |
from 8 – 34 or 10 – 60 |
model variants
The illustrations on this page show also special equipment that are not included in the standard scope of delivery. The content corresponds to the status at the time of setting (10/20). We reserve the right to implement changes to construction and equipment. Screen colours only reproduce an approximation of the actual colour hue. Surcharge for the displayed special equipment. Screen colours only reproduce an approximation of the actual colour hue. Surcharge for the displayed special equipment.
